Like most iPhone releases, Apple is expected to announce and release the iPhone 16 lineup sometime this fall.

Unless there’s some kind of delay, as in 2020, where the iPhone 12 launched in October, it’s a pretty safe bet that we should see the iPhone 16 and iPhone 16 Pro models in September. Things can always change, but this is what we anticipate right now. Unless we hear otherwise, expect a September 2024 release date for Apple’s next iPhones.

iPhone 16: price

Though it was expected that the iPhone 15 lineup would have a price increase, that didn’t happen aside from the iPhone 15 Pro Max model, which now starts at $1,200 for the 256GB version (there is no longer a 128GB variant). That was the only one in the iPhone 15 lineup that saw a “price increase,” if you want to call it that.

The iPhone 15 component prices were at the highest for Apple, though it absorbed those increased production costs. But that may not happen in 2024, so we may see a slight increase for all iPhone 16 models.

How much of a possible increase has yet to be seen.

iPhone 16: design

There will be some big changes coming for the iPhone 16 lineup, most notably the standard iPhone 16 and iPhone 16 Plus.

Earlier reports from MacRumors suggested three different prototype designs for the iPhone 16, but the most recent leak seems to confirm which one we are getting.

For the iPhone 16 and iPhone 16 Plus, Apple is departing from the diagonal camera layout that it has been using for the past few years. Instead, it’s going with the vertical pill-shaped camera island, similar to what we first saw on the iPhone X, except a bit bigger due to the lenses and sensors.

Though it’s likely that the rest of the profile of the standard iPhone 16 models will remain unchanged, there is a possibility it may get an Action button, according to earlier reports.

Any design changes for the iPhone 16 Pro and iPhone 16 Pro Max may be less drastic, as Apple seems to be pretty content with the changes it introduced with the iPhone 15 Pro. However, a more recent leak from reliable tipster Ice Universe suggests that the iPhone 16 Pro will reduce the bezel even more drastically, making it an even narrower bezel phone than the Samsung Galaxy S24.

This may translate to 1.2mm bezels on the iPhone 16 Pro and 1.15mm bezels on the iPhone 16 Pro Max.

Reports have suggested that this new Capture button will be capacitive rather than physical, and it will sit flush with the phone’s frame. Since it is rumored to be a “capture” button, it will most likely be able to act as a camera shutter button, though it could also be customizable like the Action button.

This rumor may have just been confirmed by leaker Majin Bu, who uploaded two photos of the iPhone 16 Pro case, showing larger camera cutouts. The larger camera sensor would correspond with the rumor that the 12MP ultrawide camera is set to be replaced with a larger 48MP Sony IMX903 sensor (more on that below).

The wireless antenna will be relocated to the other side of the iPhone to accommodate this new capacitive button. The Action button may also be larger on the iPhone 16 Pro models than on the current iPhone 15 Pro.

Although iPhone design changes are never confirmed until Apple shows off the phone itself, it looks like these rumors have some weight to them. In early April, well-known Apple leaker Sonny Dickson shared photos of iPhone 16 and iPhone 16 Pro dummy models — reiterating all of the design changes mentioned above.

A YouTube channel called EFTM received some metal dummy units of what appears to be the iPhone 16, iPhone 16 Plus, iPhone 16 Pro, and iPhone 16 Pro Max. Dummy units are important for case and accessory manufacturers because they make their accessories based on these units so that they are available in time for the actual product launch. The dummy units that EFTM has received appear to confirm the vertical camera modules for the iPhone 16 and iPhone 16 Plus.

However, there is a notable detail on all of the dummy units: the Action and Capture buttons. Both of these buttons could show up across the entire iPhone 16 lineup. Previous rumors hinted at the Action button coming to the standard iPhone 16 models, but the Capture button was previously reported to be only on the Pro models. Assuming these models are accurate, that appears to be changing.

Since the Capture button will be located on the phones’ bottom right edge, it’s another indication that Apple could be removing the physical SIM card completely in other countries. Apple moved to eSIM-only in the U.S., starting with the iPhone 14 line, and now it looks like that change could be coming to other parts of the globe.

Speaking of dummy units, more of them leaked in late April when Sonny Dickson uploaded the above photo to X (formerly Twitter). These particular dummies are more complete-looking ones and provide an even clearer view at what this year’s iPhone lineup should look like.

More recently, some leaked molds appeared online from ShopSystem. The molds show the MagSafe charging ring being slightly smaller in the iPhone 16 models when placed side-by-side with the iPhone 15 models. If accurate, it suggests that Apple has tried to slim down the MagSafe components to reduce the magnetic material required, though the overall position of the magnets hasn’t changed. That’s a good thing because it means that older MagSafe accessories should continue to work with the new models.

According to the latest rumors from a Weibo leak, the standard iPhone 16 lineup may come in seven colors: pink, blue, yellow, green, black, white, and purple. The iPhone 16 Pro will be using titanium again, but the “Blue Titanium” color may be dropped in favor of a “Space Black” color.

There may also be a “Natural” and “White Titanium” color, but they’ll be slightly different than previous years. White Titanium will be more silver-white, while Natural will have a gray tint to it. Finally, there’s a new rumored “Rose” color, which may overlap with the earlier rumor about a “Desert Titanium” color and would be similar to gold. Furthermore, the iPhone 16 Pro is rumored to have a new and improved process for finishing and coloring titanium, giving it a more polished brushed finish compared to the iPhone 15 Pro models.

Apple is also upgrading the microphones on the iPhone 16 lineup to have a higher signal-to-noise ratio than previous iterations. This means the device will be able to hear you more clearly, which could help with Siri requests. With reports suggesting iOS 18 will have more generative AI features, a more accurate Siri would be much needed.

iPhone 16: displays

There may be some changes coming for the display sizes of the iPhone 16 Pro models. However, the standard iPhone 16 variants will stay the same.

The iPhone 16 Pro display may be increased to 6.3 inches, up from the current 6.1 inches. The larger iPhone 16 Pro Max will be 6.9 inches rather than 6.7 inches.

With the smaller iPhone 16 Pro getting a bump in size, this will make it possible to fit a larger telephoto camera lens in it, allowing for the 5x optical zoom that debuted in the iPhone 15 Pro Max. Due to size constraints of the 6.1-inch size, the tetraprism lens wasn’t able to fit, but a 6.3-inch chassis can change that.

Apple will be shrinking bezels across the board, though the real benefits will be more obvious on the Pro models. A new report has surfaced revealing that Apple is using a new display technology called Border Reduction Structure (BRS), which lets suppliers reduce the size of those black borders around the screen.

We could also get brighter displays and more efficient power consumption, as Apple is reportedly using microlens technology in the iPhone 16 OLED panels.

A report from The Elec suggests that the iPhone 17 line will mark the first time that all models, including the base ones, will use LTPO OLED panels with ProMotion and always-on screens. Unfortunately, the base models, iPhone 16 and iPhone 16 Plus, should still have a 60Hz refresh rate display.

Also from The Elec, mass production of the OLED screen for the iPhone 16, 16 Plus, and 16 Pro are set to begin following Apple’s final approval. The iPhone 16 Pro Max OLED screen is still being tweaked by Apple, and may not get final approval for production until the end of June. The panels should be manufactured by three OLED suppliers, including Samsung Display, which will make panels for all four iPhone 16 models; LG, which will make panels for the iPhone 16 Pro and iPhone 16 Pro Max; and BOE, which will be responsible for the iPhone 16 and iPhone 16 Plus.

iPhone 16: specs

For the base model iPhone 16 and iPhone 16 Plus, we should see an A17 chip. However, this may not be the same A17 Pro chip that is currently inside the iPhone 15 Pro and iPhone 15 Pro Max. Apple is likely to use a lower-cost process for a standard “A17” chip that could make its way to the standard iPhone 16 models.

Analyst Jeff Pu thinks that Apple will go a different route and simply use A18 and A18 Pro names for the new chips. This would mean that all iPhone 16 models would have some variation of an A18 chip rather than going with an A17, which could be seen as a “last generation” chip.

While overheating was an issue with launch-day iPhone 15 models, it is said that Apple has worked on a new thermal design to help with heat dissipation. This could be in the form of a graphene thermal system for the base iPhone 16 models, while the iPhone 16 Pro might have a metal battery casing. Right now, the iPhone uses copper for the heat sinks, but graphene has higher thermal conductivity.

There have been rumors that Apple has been working on its own in-house 5G modem chips, but that won’t happen in 2024. Instead, the iPhone 16 Pro may use Qualcomm’s Snapdragon X75 modem for faster and more efficient 5G connectivity. However, the base-model iPhone 16 will continue to use the Qualcomm X70 chip that is currently in the iPhone 15. The iPhone 16 could also have Wi-Fi 7 technology that could get at least 30 gigabits per second, up to 40Gb/s.

iPhone 16: cameras

As mentioned earlier, the iPhone 16 and iPhone 16 Plus will have a dual camera layout presented in a vertical pill-shaped camera island. The iPhone 16 Pro and iPhone 16 Pro Max appear to have the same triple-lens camera layout as has been used in the past few years.

Though the base models will have a different camera layout, the camera specs don’t appear to have been upgraded. However, that’s not the case for the Pro models.

This year, Apple could upgrade the ultrawide lenses on the iPhone 16 Pro and iPhone 16 Pro Max to a 48-megapixel sensor — a big jump from the current 12MP on the iPhone 15 Pro. If this is the case, then ultrawide shots will have more detail, especially in lowlight environments. The iPhone 16 Pro Max may also receive improvements in all three lenses, as it will have two glass elements and six plastic elements for each.

Those who prefer the smaller Pro model will have a good chance of getting a camera upgrade this year, too. Since the iPhone 16 Pro will have a larger 6.3-inch display, there will be enough room to fit the tetraprism camera into the chassis, allowing for 5x optical zoom capabilities — a nice upgrade over the 3x optical zoom offered by the iPhone 15 Pro.

The lenses on the iPhone 16 Pro and iPhone 16 Pro Max could also be seeing an improved lens coating that uses atomic layer deposition (ALD), according to a leaker by the name of yeux1122. With ALD, Apple would have even more control over the thickness and composition of the coating since the process involves applying one atomic layer at a time. This can help fine-tune the camera lens stack without adding any extra bulk.

But what does that mean in practical terms? Essentially, the ALD coating will help reduce digital artifacts in photos, such as lens flare and halos, when direct sunlight is involved. And fast-moving objects will have reduced ghosting. It also means some extra protection for the camera lens, improving durability.

iPhone 16: battery life

We may finally see some better battery life with the iPhone 16 Pro models, as it’s rumored to use stacked battery technology. With stacked batteries, it can result in higher capacity and longer lifespans. This may also bring faster 40W wired and 20W MagSafe charging speeds.

Charging speed has long been an area where Apple has lagged behind its competitors. If the iPhone 16 really does address this, we could be in for a proper treat.

According to @MajinBuOfficial, we also have a good idea of what to expect from the batteries in the entire iPhone 16 lineup, with changes across the board. The leaker claims that the iPhone 16 and iPhone 16 Pro Max will have larger batteries than their predecessors. However, the iPhone 16 Plus will get the short end of the stick and actually have less battery capacity than before. The Pro Max model will also no longer use the L-shaped battery design and will go back to a rectangular shape like with the iPhone 16 and 16 Plus.

According to an earlier leak by @MajinBuOfficial, who has a mixed record with Apple leaks, the standard iPhone 16 will have 3,561mAh (up from the iPhone 15’s 3,349mAh), the iPhone 16 Plus is 4,006mAh (down from the iPhone 15 Plus’ 4,383mAh), and the iPhone 16 Pro Max will be 4,747mAh (up from the iPhone 15 Pro Max’s 4,422mAh).